Site Information

 Loading... Please wait...
  • Image 1
  • Image 2
  • Image 3

Brushless Motor+ESC+Prop Power Kit for up to 1900g RC Model Airplanes - 3S & 4S

£37.99 (inc VAT) £31.66 (exc VAT)
Quantity:

Product Description

Brushless Motor Power Kit.  Motor, ESC, and Propeller for RC Models up to 1900g

Please choose one of the following from the dropdown selection above:

- All purpose power kit (for 3S / 4S lipo)
  This will give good speed while still offering a good combination of flight time and noise level.   (Recommended for most set ups)
- High speed power kit (for 4S lipo)
  Speed is higher, noise is higher and flight time is lower.


High quality power set up for your RC aircraft with weights of 800g to 1900g. 
Flight performace will depend on the weight of your model, with weights in the middle of the range (about 1200g) having good all round performance for sport flying. 
Lighter models will be highly powered, able to climb vertically unlimited and heavier models will have a slower rate of climb.



Choose the type of set up you need and all components are provided to fit to your aircraft ready to fly.

Connector to battery is a 'Deans' T type connector, but this can be changed to whichever connector you wish, or you can use a small cheap and lightweight adaptor.



Included with each kit:

  • Brushless motor with prop adaptor, mounting plate and screws
  • ESC speed controller with all necessary wires and connectors
  • 4mm gold plated bullet connectors between ESC and motor
  • High efficiency propellor (similar to APC style propellors which can be used as replacements if needed - but always replace with the same size and pitch of propellor or damage can occur to the motor and ESC)
  • Deans type T-connector fitted to ESC (plus matching connector with heat shrink tubing for your battery if needed)



Specifications:

All purpose
Motor

Weight(including connectors): 100g
Size: 35x35x36mm
RPM/V: 1000KV
ESC
Constant current: 50A
Weight: 46g
Size: 46x35x8mm
Prop
3S: 10x7
4S: 8x6

High speed
Motor
Weight(including connectors): 100g
Size: 35x35x36mm
RPM/V: 1400KV
ESC
Constant current: 50A
Weight:46g
Size: 45x35x8mm
Prop

7x5

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Find Similar Products by Category